NE plate chain bucket elevator for plate chain, gravity-induced discharge of lifting equipment

Model Number: NE hoisting Brand Name: CHMM Key Specifications/Special Features: NE plate chain bucket elevator for the plate chain, gravity-induced discharge of the lifting equipment.It is suitable for vertical transportation of powder, granule, small block or non-abrasive materials such as raw material, cement, coal, limestone, dry clay and clinker.The material hoist is the introduction of foreign advanced technology and research and development of new products; NE-type chain bucket elevator hopper for the inflow, the material flow into the hopper inside the board chain to upgrade to the top of gravity in the material under its own discharge, Its chain material and the chain hoist of the same material, are made of high quality alloy steel forging, wear and reliable.Drive part of the use of hardened surface reducer1, The upper device: the installation of rails (double row), to prevent the chain swing, backstop, to prevent hopper rotation, the material blocking the lower chassis, unloading port equipped with rubber plate to prevent back material.2, The middle section: part of the middle section with rails (double row) to prevent the chain of work in the swing, part of the middle section with access door for maintenance.3, The lower device: installed with tensioning device, NE15 ~ NE50 spring tension, NE100 ~ NE800 with heavy hammer box tension.4, The upper and lower sprockets using ZG310-570. The overall quenching and tempering, HB229-269 tooth surface quenching HRC40 ~ 48.5, Plate chain: chain plate with 45 # HRC36 ~ 42.A, The use of the plate chain has a high shear strength, fatigue strength and wear resistance, low operating failure rate, long service lifeB, Using a lower chain speed (0.5m/s)C, The use of large-capacity hopper and a smaller bucket distance, low drive power and a large amount of transmission. Particularly adapted to enhance the broken limestone and cement clinker (≥ NE50).